1 RPH Output Mechanical Drive System. Used to drive existing tower clock dial gear assemblies. Shaft can be mounted vertically or horizontally. Also available in a 115/240VAC 50/60HZ versions. Replacement for Simplex 568-2 Tower Clock Movement.
Available by special order with a 0.8 RPH (revolutions per hour) drive, as required for certain Seth Thomas tower clock movements.
Part number: MOVT-C1MI-DRV-0.8
Mechanical Specifications
Up to 72″ (183 cm) Dial Unprotected Hands
Available 1RPH and 1/2RPH
Contact factory for specific application
Electrical Specifications
24VAC – 50/60 HZ – 250 mA – 6W
(8 SEC/MIN RUN TIME)
99B Control required for operation
You can find additional information on other designs on our main tower clock movement overview page.







